 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ao smith motor wiring diagram c56a04a19 cw and ccw
I have a garage door opener frame with no cover with no info as to how its wired. All I want is to run the motor forward and backward to raise and lower a trap door in the atic. It's a half hp type c 1725 rpm 115/230v 8a/4a. 2L96. I ran a 2-12 w/g for power and another 3-12 w/g for switching, to the motor, and I have a centering switch that is spring loaded to return to center and a single switch below it to kill the neutral wire in the 3-12 circuit if anything goes wrong. I eliminated all the extra stuff, down to just the motor and chains and sprockets to the shafts.
Its an ao smith c56a04a19. Its got 4 wires commin out of each hole... Orange w/blue tracer 8-blue 6-brown 9-brown 7-lavender 10-red 2-white 4-yellow 2-white tied to 4-yellow How do you respond. On this site or to my email address? [email protected] |
||||
Check out some similar questions!
I am replacing a GE arconditionaing condenser fan motor with an AO Smith 5-5/8" diameter totally enclosed outdoor sleeve bearing fan motor Stock Number FSE1026S. The specs on the fans are simillar and the AO Smith motor is a universal replacement for my unit; however the old GE fan motor had four...
Need help wiring new blower motor for ac. New one has 4 wires, old one has 5.
4 wires coming down from two speed switch, 1-green, 2-black, 1 red. The motor has a plate with 3 termination spaces marked 1, 2, 3 or 4. The green goes to the green grounding screw. Which terminals do the 2 black and 1 red occupy to get the two speeds. 230 volt motor, Centuary by AO smith.
I am replacing a GE indoor fan blower motor with an AO Smith motor (same specs, supposedly the replacement motor). The old GE motor had only two wires besides the ground wire (1 black, 1 yellow, & green ground wire) Both the yellow and black wires from the GE motor were attached to the capacitor;...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
