 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I'm trying to hang a chandelier and can get it to turn on but it won't turn off at the wall dimmer unless I unscrew the fuse (from old fuse box). Chandelier has two wires, one marked with black tape. The ceiling has one cable with three copper wires, sheathed in black, red, and white. And, two...
Hello all, I'm trying to install a ceiling fan in an old house (about 60+ years). I have a new ceiling fan with 4 wires, black, blue, white, and green. On the ceiling, there are only three wires, 2 copper wires (unfortunately no colors, just a dark covering over both), and a green wire, which has...
I removed a ceiling fan and light kit and replaced it with a ceiling fan and light kit with a remot. The light kit can be controlled by 3 switches(=4 way) and fan by 1 switch. The ceiling has black, white, red and copper wire, the old ceiling fan had same wiring, however, the new fan light kit...
My '70's kitchen has a dropped ceiling, with a 12" recess that is 8' X 3.5'. There are 6 fluorescent lights around the top of the recess and it was covered by plastic diffuser panels to create a dome with a ceiling fan in the middle. Removing the dropped ceiling would be major deconstruction that...
I am attempting to install a hampden bay minuet 2 fan. The prexisting ceiling wires consist of two black, two white, 1 red, and my ground wire. A basic lite fixture was installed previously and controlled by a single wall switch. The wall switch has 1 red on the bottom and two black on the top...
View more questions Search
|
