 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hunter Thermostat 44155C set to cool but the fan won't come on
It aw working fine and yesterday I notice my home was starting to get up. The thermostat is set to cool, but only warm air is coming through. Normally when it gets above my set temp I can hear the fan kick in, but it is not doing it? What can be the problem.
|
||||
Check out some similar questions!
Hunter thermostat 44155c I have it set for a certain temp the furnace keeps running
[ 1 Answers ]
I woke up in the middle of the night and it was 82 what is wrong?
I have a new Hunter 44155C thermostat and am replacing an old carrier thermostat
[ 0 Answers ]
The old Carrier has a wiring code as follows: C= Brown W2 = White R = Red E= Blue G= green O = Orange Y = Yellow According to the Hunter instructions I am uncertain about the O and the E ? Can you help?
Hunter thermostat 44155c
[ 1 Answers ]
I have the following colored wires coming out of the wall Green Red Orange Yellow White Black Blue The thermostat has the following connections:
Hunter 44155C Thermostat
[ 1 Answers ]
New hunter 44155C thermostat these are my ports to connect to: Rh- 24 volt Rc- 24 volt cool g- Fan y/o- air conditioning compressor w/b- heating or reverse valve operation in heat mode. y1- heat pump compressor These are my wires
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
