Ask Experts Questions for FREE Help !
Ask
    electrical Q's Avatar
    electrical Q Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 9, 2012, 07:04 AM
    100a 600v can it feed 1300000w
    I have a 100a 600v 3phase service, I need 135000w of equipment feed from it some are 120 some are 208 3phase. Can that service handle the load
    hfcarson's Avatar
    hfcarson Posts: 1,003, Reputation: 49
    Ultra Member
    		  
    #2

    May 9, 2012, 11:07 AM
    Based on the raw numbers given, no it cannot...
    First where are you that you have a 600V electrical service?
    Or is it really 208V, 240V or 480V?
    Knowing this greatly effects the numbers.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

600v 100amps, how many amps at 240v [ 6 Answers ]

How many amps are the maximum amount of amps can get from 600v 100amp service down to 240v? Thanks have a good day.

Amp rating for 4 awg aluminum 600v [ 1 Answers ]

I am trying to find the max amp load for #4 AWG Aluminum 600v cable

Overvoltage 600V [ 2 Answers ]

I have a 150 KVA generator, around 10 days ago, it suddenly started giving an output of 600 V, the electrician who came told me that the heat sink and the photo transistor were burned out, and he replaced them. To be honest they cost quite a load of money. Still the generator is not functioning,...

What type of fuse is suitable for 600v,15.6 mohmsresistance (short circuit) [ 3 Answers ]

Find the appropriate fuse Calculate current

I need a 100A subpanel from parallel 100A main panels [ 3 Answers ]

I'm planning to install a low voltage driveway snow melt system that will require 70A (240V). I want to run this from a new 100A subpanel in my attached garage. My problem is that my 200A service is split into two 100A main panels. How would I accomplish this? My other option I suppose is to run a...

View more questions Search