Ask Experts Questions for FREE Help !
Ask
    dougsawvell's Avatar
    dougsawvell Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 8, 2012, 08:43 AM
    What are the NEC requirements for a 480 VAC man accesable electrical vault.
    We are required to install an underground, man accessible 480 VAC single phase concrete electrical vault which will contain a 480 VAC single phase feeder & disconnect, 480/120/220 VAC transformer and 120/220 distribution panel. What are the NEC code requirement for this vault?

    >email address removed<
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    May 8, 2012, 12:36 PM
    Are you the electrician? GC? Client?

    This is not really a question for a Home & Garden DIY message board.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #3

    May 8, 2012, 04:04 PM
    Your topic is well beyond the scope of this forum. Your situation is unique, and requires several detailed questions asked, and a fair amount of Code research.

    Due to the occupancy by people, there are some critical issues that need the be considered in the design.

    You may view the 2008 and 2012 NFPA 70 National Electric Code at NFPA and review ARTICLE 450 - Transformers and Transformer Vaults.

    You need to do a quick register, and look for list of standards near the bottom left of the home page.

    I strongly recommend that you seek professional advice with this project.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

NEC/NESC requirements for direct buried cables on the DC side [ 7 Answers ]

Does anyone know any where I can find texts/paragraphs covering the requirements in terms of burial depths, voltage, etc for underground cables on the DC side. I looked at section 35 of the NESC Code 2007 Handbook as well as the section 300.5 of the NEC 2008 handbook. However, I believe those only...

NEC/NESC requirements for direct buried cables on the DC side [ 2 Answers ]

Does anyone know any where I can find texts/paragraphs covering the requirements in terms of burial depths, voltage, etc for underground cables on the DC side. I looked at section 35 of the NESC Code 2007 Handbook as well as the section 300.5 of the NEC 2008 handbook. However, I believe those only...

Thhn - nec ratings vac or vdc? [ 7 Answers ]

I need somebody to show me proof that the national electrical code amperage ratings of thhn copper wire are based on 120 vac please.

NEC 2002 and Electrical Boxes [ 1 Answers ]

I want to replace four fluorescent lights that are under my patio with fans. I removed the lights and it seems that the box is in a 1x3 (the light weighs only a couple of ounces). I am wondering if the code (which Nevada dwellings must comply with) specifies how an electrical box must be mounted...

NEC requirements for C.A.C. Supply lines [ 3 Answers ]

I'm running electric in a house for central air and here's my situation: 2 air handlers in the attic, 2 compressors outside. I want to make sure my work is to code. I know I need separate dedicated branch circuits for each of the 4 appliances. 1) For the air handlers, do I need to run...

View more questions Search