Ask Experts Questions for FREE Help !
Ask
    MikeyLV's Avatar
    MikeyLV Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jul 30, 2008, 08:00 PM
    NEC 2002 and Electrical Boxes
    I want to replace four fluorescent lights that are under my patio with fans. I removed the lights and it seems that the box is in a 1x3 (the light weighs only a couple of ounces). I am wondering if the code (which Nevada dwellings must comply with) specifies how an electrical box must be mounted and if there are any weight bearing minimums. If so, I can go back to the builder and ask them to remedy the situation.
    Washington1's Avatar
    Washington1 Posts: 798, Reputation: 36
    Senior Member
    		  
    #2

    Jul 30, 2008, 08:20 PM
    I'm sure they are not required to replace your light boxes with paddle fan boxes, unless you pre-bought the house and requested the install.

    You may have to replace the boxes yourself.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Electrical boxes [ 9 Answers ]

I was just told by someone that you have to have insulated outlet boxes for exterial walls inside the basement? Is this true? I've never heard or seen these, I've seen them for exterior outlets outside, but not inside.

Is dust in electrical outlet boxes a fire hazard? [ 12 Answers ]

I've been changing out all my electrical outlets and switches because they were beige and I like white... anyway I find that some of the electrical outlet boxes are full of dust. I pulled out the shop vac and took care of it and I noticed it was outlets that are powering something constantly (ie:...

Need for small light weight electrical boxes [ 2 Answers ]

Hi. For a friends band I have been asked to wiring a portable lighting panel to display the bands name. This will be done using a sheet of plywood and mounting a series of small ceiling light fixtures on one side of the plywood, and running the electrical wiring on the back side of the plywood. ...

Electrical boxes [ 1 Answers ]

How can I jump my electrical boxes? I just recently bought an apartment building and I would like to make it one whole house and I would like to run the downstairs apartment to upper.. there are to separate boxes that run each apartment side by side.. I was told I could "jump" one box from the...

Electrical boxes [ 2 Answers ]

I think I have an unique problem. I have a 4"x4"x6' space which is all wall board above a pass through. I have 3 small wall sconces I want to mount above the pass through. The problem is the wall board. How do I attach the electrical boxes so I can mount the light fixtures? At this point I have the...

View more questions Search