Ask Experts Questions for FREE Help !
Ask
    SolarFreak's Avatar
    SolarFreak Posts: 10, Reputation: 1
    New Member
    		  
    #1

    May 26, 2009, 09:39 AM
    NEC/NESC requirements for direct buried cables on the DC side
    Does anyone know any where I can find texts/paragraphs covering the requirements in terms of burial depths, voltage, etc for underground cables on the DC side. I looked at section 35 of the NESC Code 2007 Handbook as well as the section 300.5 of the NEC 2008 handbook. However, I believe those only deal with AC current. I need similar information but for DC current. Anyone?

    Thanks!
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    May 26, 2009, 10:28 AM

    Post on Electrical and Lighting site. Stan and TKRussel know code forward and backward.
    SolarFreak's Avatar
    SolarFreak Posts: 10, Reputation: 1
    New Member
    		  
    #3

    May 26, 2009, 11:37 AM
    Thank you hkstroud. I shall post on Electrical and lighting site
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Understanding Direct Venting requirements [ 6 Answers ]

I had an issue with a leaking furnace exhaust pipe from condensation. I also happen to have a 15 year old hot water tank that should be replaced. I'm told the hot water tank is not a direct vent type and new safety standards won't allow them to install the same type -- I need a direct vent model....

The cables of my ac are torn by my dog how can I change the cables? [ 2 Answers ]

The cables of my ac are torn by my dog how can I change does electrical cables?

Determine factory overhead application rates-direct labor, direct lobor hrs, mach hrs [ 0 Answers ]

Need to figure factory overhead using direct labor cost method, direct labor hours method, machine hours method. Info: Direct labor cost - $432,000 Direct labor hours - 90,000 Machine hours - 120,000 Manufacturing costs: Direct materials - $180,000 Direct labor - 540,000

Digging up a buried car! [ 2 Answers ]

On June 15th 2007 in Tulsa OK, they will unearth a time capsule with a then brand new 1957 Plymouth Belvedere filled with all kinds of things from 50 years ago. You can read about the centennial at BuriedCar.com Very interesting news for anyone who may remember that day or have been to the...

Kenmore Elite not cooling refrigerator side or side by side [ 2 Answers ]

I have a Kenmore Elite Model 53609202 side-by-side. The freezer is working fine, the air flow into the freezer is working, the fan is on. There is another fan in the bottom rear that is also on. There is nothing in the refrigerator to block the vents. There is a little frost on the rear panel...

View more questions Search