 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a goodman furnace everything works fine until the blower tries to come on and it will not turn, but if I turn it by hand it runs. Is there a fix for this
How can you tell if your heat exchanger is bad? I am getting high Co2 reading. And the flames seems to be blowing to strong, or could that be the gas valve, or dose it need adjustment in the tudes? I don't think the chinney is plugged.
My goodman furnace/ heat pump will not turn on when I turn on at AC the unit outside will turn on but the blower will not. There trouble shooting light is not on.
Goodman 95% 2 stage furnace. LED code says pressure switch is stuck open. 1) Changed switch. 2) Jumped Limit switch. 3) Changed PCB. Same error code. 3 blinks "code says pressure switch is stuck open" Can You Guide me further
I went away for a couple of days and returned to a cold house. I have a Goodman Model HCC075ND4R that has Electronic Ignition with Relay + VR80204 - S8600H Control. I can not get it to fully ignite. It tries to ignite over and over again. I see a single blue flame for a short time, but not main...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
