 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Frigidare model gler341as2
When you turn the switch to start you can hear a hum but it does not tumble. I moved the drum and it seems like the belt is still on by the drag on the drum. I also flipped the breaker. The door switch turns off the light inside.
Is it the motor? |
||||
|
||||
|
You will get a drag from the felt liner at the rear of the drum. Some Frigidaire dryers have a drum bearing, however. You are going to have to take it apart to see what is keeping it from working. You need a meter to check the safeties because one could be bad if you have not cleaned the dryer. You want to make sure you clean all parts of the dryer or it will burn out a safety. Here are some manuals: http://dl.dropbox.com/u/8010163/Frig...r%20Models.pdf
http://dl.dropbox.com/u/8010163/Frig...e%20Manual.pdf |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
The furnace only seems to blow warm air every 3rd time it runs. Is this normal or do I have a problem. The temp. outside went to 0F and the frurnace would only heat the house to 56degrees. Even though the thermostat was set on 80degrees. When the outside temp came back up to 30F. The furnace heated...
Had a problem with the heating element - replaced it with no issues. Except, getting the damn thing back together. I noticed that since putting it back together, the fan belt is loose. Any ideas on how to fix that?
I just bought a Frigidaire Dryer model # GLER341AS2 from the Furniture Mart 4 months ago and today I was doing laundry and it wouldn't start. It just makes a faint buzzing noise when I try to start it? Any ideas??
This is a good one. I hope someone can help!! I noticed my dryer wouldn't dry the clothes completely anymore. 3 or 4 cycles and they are still damp. So I did the first logical thing. I checked the dryer venting. Everything was good and to be sure I ran it with the vent disconnected and...
View more questions Search
|
