 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have a frigidare furnace model fg6rc080c-12b
The furnace only seems to blow warm air every 3rd time it runs. Is this normal or do I have a problem. The temp. outside went to 0F and the frurnace would only heat the house to 56degrees. Even though the thermostat was set on 80degrees. When the outside temp came back up to 30F. The furnace heated the house to 70degrees. Is this all normal or do I have a problem? Also I was just down beside the furnace and watched it run twice with the upper door off and could not see a flame through the sight glass."
|
||||
Check out some similar questions!
Hi I am selling my house and I would like to know the lifespan and long-term performance of this model of Beach oil burning furnace. And if possible, what year it was manufactured, I think it's in the 1970's or 80's. I need this information to provide to my realtor to find out if it needs to be...
The part # is af314-01-2785-d-2-7d by ther-o-disk? Thanks.
Whem I turned on the thermostat, the furnace does nothing, and the red l.e.d. blinks twice. Fuse is o.k. wiring o.k. I thought that at least the induction motor should activate.
When I mash the start button the dryer starts and when I let go it stops... is there a safety feature in the button or does it just need replacing
I need to change the Baffles in my dryer as they are loose and clothes, coins and dryer sheets are getting caught under neath them, but I can not figure out how to get into the dryer to tighten them. It is a stackable washer dryer pair with the dryer on top. I searched out how it might be done ,...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
