Ask Experts Questions for FREE Help !
Ask
    Vickiguy's Avatar
    Vickiguy Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 21, 2010, 12:48 AM
    Luxaire heat pump nz
    Hi
    I have luxaire heat pump
    Since yesterday it displaying E2 in place of temp.
    Can someone guide me the problem in wiring /anything else.
    Thanks
    captainlilo's Avatar
    captainlilo Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Apr 26, 2012, 09:36 PM
    E2 error code means the temperature sensor in the outdoor unit is open circuit - or there is a break in the wiring to it.

    Have you fixed it yet?

    What model is the outdoor unit?

    Regards

    Lyal
    shirleyfgrice's Avatar
    shirleyfgrice Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Jun 24, 2012, 03:41 AM
    Quote Originally Posted by captainlilo View Post
    E2 error code means the temperature sensor in the outdoor unit is open circuit - or there is a break in the wiring to it.

    Have you fixed it yet?

    What model is the outdoor unit?

    Regards

    Lyal
    Who can service this fault in the christchurch area?
    Thanks
    Shirley
    ljneilson's Avatar
    ljneilson Posts: 1, Reputation: 1
    New Member
    		  
    #4

    May 26, 2013, 02:11 PM
    Good morning,

    I have a Luxaire minisplit high wall air conditioner LJHA07-24 MEPS


    The LCD on the remote got wet and no longer works (although the remote itself works) model GZ-128-E1

    How do I go about replacing the remote with one that will work with my unit.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Installed a honeywell pro6000 stat on a carrier heat pump, cooling mode is heat pump [ 2 Answers ]

Installed a honeywell pro6000 stat on a carrier heat pump, cooling mode is heat pump

How do you change a high pressure safety switch on a luxaire heat pump [ 1 Answers ]

High pressure safety switch has yellow wires and apprears to be soldered on. Is that possible or does it come off without removing charge.

What do I hook Y2 out, W2 out, W1 out, X/L, Bsg, Bs on a Luxaire Heat pump board to? [ 3 Answers ]

Luxaire M# HL3A030F1 what do I hook Y2 out, W2 out, W1 out, X/L, Bsg and Bs coming out of board to. What purpose do they serve?

Luxaire heat pump [ 2 Answers ]

I keep replacing 3 amp fuses on furnace and they keep blowing.Why

Luxaire heat pump [ 1 Answers ]

Older model luxaire heatpump will blow warm air in heat mode for several minutes then star blowing out cold air. Unit has new filter and coils are clean. The blower motor. Condensing motor and compressor run but blows cold air. Any suggestions on what problem could be?

View more questions Search