Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Water shut off valve for toilet how to fix it
[ 6 Answers ]
I have sut the water off to the house and am attempting to install a new valve but for some reason the new valve doesn't look the same but it the right size I am not sure how to install it. I went to Lowe's with the old one and they sized it up buti guess my valve is older it has a brass ring in it...
How to fix a leak on a copper x pvc x cast iron Tee?
[ 2 Answers ]
Hi, I just wanted to know how to fix the leak on the Tee fitting going to my toilet. It is 1/2" copper X 2" pvc x 3.5" Cast iron Tee that feeds water to my toilet and sink, and collects waste from my Toilet and washer machine. I can't find this fitting anywhere on the computer, and my plumber said...
Fix shower on off pull valve
[ 2 Answers ]
There is water coming from the faucet, the on/off pull valve and the showerhead. How do I fix it?
Check valve fix for well pump ?
[ 1 Answers ]
I have a submersive pump well system and my check valve has gone bad. So my question is can I install a new check valve up by the bladder or do I have to pull the pump up and if that's the case then how hard a job is that to do
Sanitary Tee Vs and Tee w/ longer sweep
[ 2 Answers ]
It seems obvious, but I wonder what the logic is behind the use of a short radius elbow or sanitary tee vs one of the long sweep elbows or tees in a sewer rough in. Is it only for lines w/ solids or large volumes in laterals or drains? Or are the longer sweeps more for vertical stack... View more questions Search
|