Ask Experts Questions for FREE Help !
Ask
    marvin725's Avatar
    marvin725 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 8, 2012, 02:26 PM
    Amana 90 furnace
    My blower motor will not stop running ,I replace the main limit and the secondary limit switch, the only way its stop running is when you open the lower panel
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Mar 9, 2012, 04:58 PM
    Count the flashing lights on the control board it will give you the fault code. The code for the flashing light should be on the blower door of the furnace.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Amana furnace [ 2 Answers ]

Hi Everyone, I am having so much trouble, trouble shooting my furnace, I have a Amana Furnace, I noticed that the Burner is not staying long enough for the heat to blow through the vent. This is my observation, once adjusted the temp desired in the thermostat, the burner on the furnace...

Amana 80 see furnace [ 0 Answers ]

I have an amana 80 see furnace and it comes on and lights for a second than shuts off does this several times then sometimes when it comes on it lights fine and stayes running until it reaches desired temp then shuts off like normal

Furnace Amana 80? [ 1 Answers ]

Q. Red indicator light located on the ignition control unit is ON. What is wrong with my Amana 80 Furnace? Please help

Amana furnace [ 2 Answers ]

I misplace the wiring diagram and installation manual for my Amana Furnace. Any chance someone, website may have a good source for that: Mod # GUCO70B40A, Serial # 9110104173, Mfg # P9114303F Suggestions for a fix would be appreciated also: Having problems starting. The igniter works fine...

I have an Amana 80+ furnace. [ 1 Answers ]

When the temperature reaches the desired setting, the gas burners turn off as they should, however the fan continues to run and blows cold air. The temperature dips well below the thermostat setting, but the burners do not turn back on and the fan continues to run. I also notice a flashing red...

View more questions Search