Ask Experts Questions for FREE Help !
Ask
    sdietz444's Avatar
    sdietz444 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 1, 2012, 09:09 AM
    DIY^ Soffit/facia Install
    Ineed a visual of how they are to be installed
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Mar 1, 2012, 06:47 PM
    Vinyl or aluminium? How To Install Soffit And Fascia - YouTube
    Jas1603's Avatar
    Jas1603 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Mar 1, 2012, 09:03 PM
    What exactly are you try to find out. Is this new construction or remodel . What does your substrate look like do you have drip edge under your shingles or a metal roof. Go into detail
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Soffit baffle [ 0 Answers ]

My house has Tray Ceilings in two rooms. After inspecting my attic ventilation I noticed that there is no air channel from the soffit vents in these areas. So I try to install some baffles. The problem is the insullation is filling the 6" (2"X6" rafters) void and the baffles do not push all the...

Soffit overhang [ 6 Answers ]

I have a colonial with a cantilevered overhang that was covered with aluminum soffit panels when the house was vinyl sided. I donot believe that they insulated in between the joist of the overhang. Do you think it would be possible to remove the metal soffit panels and insulate between the joist...

Diy install ground wire for 3 prong outlet [ 1 Answers ]

I just moved to the dominican republic... my 2nd floor apartment has your typical 3 prong outlets... but no ground!(?). I hear this is normal down here. The apartment is make of cement blocks. Usually they build the walls then break them to install the wiring before cementing it flat. ...

Fascia Material [ 2 Answers ]

My fascia boards are rotting and I want to replace them. I think I want to go with a composite material because it will be low maintenance but it also has to be strong enough to support gutters. I found this stuff in Home Depot called "Tuf Board" and it appears to be a composite. What do you...

Soffit install [ 1 Answers ]

I want to install siding on my house .I need to know if I can cover the soffits after the siding is hung. Or will this create a problem

View more questions Search