 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
When you say it runs all the time---- Blower runs but no heat or blower runs and you have heat? I think that model uses a camstat fan limit control time delay for the blower that can get stuck on keeping the blower on. The model # of the furnace will help.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a Furnace Model PG 100 HBM and SERIAL number is 77619. The blower is now running continuously. I am looking for a schmetic for this furnace. If you can provide me any information, diagrams and let me what could be causing this and what I need to do to fix this, your help will be appreciated.
I've just replaced the filter on my Bryant 310aav furnace, and there is no paper with fault codes glued to the inside of the door. There are fault code numbers in the owners manual, but without know what the series of flashing lights mean, there's no way to determine the fault code. 3 short...
I have a 376B Furnace and the blower is now running continuously. I found on another thread that this could be the Circuit Board. Is that the same as the "Carrier Inducer Control Board " which I find listed on the parts list. Any other suggestions that I could try first? How do I know if this...
Hi, I have a 1980's 100,000 BTU Heil Gas Furnace (Spark Ignitor type). The problem that I am having is that the Blower fan runs continuously after the heating cycle. I know that it should run for awhile after the heating cycle to cool the Burner etc to prevent warping, but the Blower just keeps...
My Tempstar 5000 heats and cools fine, but the circulation fan cannot be controlled from the control box; I have to turn it off by turning the unit off in the home. What could be wrong?
View more questions Search
|
