 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My Bryant 310aav furnace blower runs continuously
I've just replaced the filter on my Bryant 310aav furnace, and there is no paper with fault codes glued to the inside of the door. There are fault code numbers in the owners manual, but without know what the series of flashing lights mean, there's no way to determine the fault code. 3 short flashes, then 3 long flashes. After a few minutes it becomes 1 short flash, 3 long flashes. The blower runs continuoiusly and the pilot won't light. Can anyone help?
|
||||
Check out some similar questions!
Bryant furnace. Model # 395cav048090abja Series B Fan constantly running. Won't turn off unless power turned off at furnace. Won't fire. No heat. Does anyone know what this could be? It's getting cold in here ! Thanks
Bryant furnace model 310AAV/JAV the blow run continue. Even disconnected from the thermostat
Hi, I have a 1980's 100,000 BTU Heil Gas Furnace (Spark Ignitor type). The problem that I am having is that the Blower fan runs continuously after the heating cycle. I know that it should run for awhile after the heating cycle to cool the Burner etc to prevent warping, but the Blower just keeps...
I have a Bryant 310aav furnace that recently quit blowing any air into the house, when I checked the furnace I noticed that the blower motor wasn't operating at full capacity. I also noticed that when the furnace would kick on it was way quieter in the house at the intake than normal, so I went...
Folks, Could really use some help/advice. I have a Bryant 310AAV gas furnace installed in our home. This is new construction (4 years old) so I assume it's one of the new furnaces that does NOT have a pilot. Here is the problem: The furnace is not blowing any hot air. I've turned the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
