Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hampton Bay Ceiling Fan trouble shooting
[ 15 Answers ]
We bought two new ceiling fans, both are Hampton Bay, we've begun to install both, but when we reached the point of wiring the fan, we turned on the electrical switch to see if the fans were working. With each fan, we got no electricity. Can you tell me what we're doing wrong? Do we have to install...
Hunter fan model # 23282 trouble shooting/ electrical?
[ 1 Answers ]
We have a hunter fan model #23282 fan in the family room. The last couple of days, turning on the light By the remote, the 3 light bulbs dim after a couple of minutes. Today, when turning on the light, the 3 bulbs blink on and off ever second and at a very dim wattage. Could this be a short or a...
Aloha breeze fan trouble shooting
[ 1 Answers ]
Pull chain turns on 3 speed motor of fan but blades don't rotate
Wiring a Cassablanca fan and light to a wall switch that operates each function seper
[ 4 Answers ]
I am trying to connect a ceiling fan and light kit to an exsisting wall switch. My problem is there 4 wires to the fan switch and only two wires from the wall. Can you help me?
Trouble shooting
[ 1 Answers ]
hi I have 1997 dodge ram 1500 4x4 my tail light went out and then the single light would . Cheeked out both. Bulbs on the right side, know the kicker is the hazzards work, the turnsignal works, if I step on the break.pleas help. Note I have replaced the turnsignal switch. still no luck. View more questions Search
|