Ask Experts Questions for FREE Help !
Ask
    Michael72's Avatar
    Michael72 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 15, 2012, 07:29 PM
    Michael no pressure on Ford F250 6.0
    I filled up my 2005 Ford F250 with 10% BD Diesel and lost all turbo pressure, I stopped and restarted it and got on it and the pressure went up but very low what should the pressure be and is BD Diesel bad?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Feb 15, 2012, 08:12 PM
    I wouldn't use it, unless I had to.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ford f250 6.0 problems? [ 1 Answers ]

2005 6.0 change oil drained water seperator at about 9000 rpms starts missing,like its cutting out

Ford f250 troubleshooting? [ 1 Answers ]

06 f250 6L 188K never had wrench on engine 5k oil changes at ford dealer replaced fuel pump 158k truck starte smoking black from low rpm a little hesitation now billows white smoke at low rpm slowly accelerates to 2500rpm then runs a little black exhaust then accelerates fine. A little rough...

Ford f250 6.0 not get fuel [ 0 Answers ]

I have A ford f250 with a 6.0 I changed both fuel filters and now the truck only made it a half mile down the Rd. When I pull out the top filter it's dry and the one on the frame is always filled with fuel... What am I missing?

Ford f250 problems [ 2 Answers ]

Why would the rear diferential grind and jump when turning under heavy four wheel drive load, but run smooth under all other conditions? 1995 f250 power stroke.

Ford f250 6.0 [ 2 Answers ]

2004 f250 6.0 power stroke it will turn over but not start

View more questions Search