Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
What is TWO 100mmC with 4x300 sq. Mm. Connection between transformer and panel board
[ 0 Answers ]
I just want to understand what will be the 3 phase installation between the transformer and the panel board showing TWO 100 mmC with 4x300 sq.mm. cables.
Scott transformer connection
[ 0 Answers ]
Is it possible to connect secondary windings of scott connected transformer in series to have 0 degree phase shift and at the same time input line should balance.
12v transformer failure
[ 2 Answers ]
I had some LED light bars for small hallway directional signs that are run 24/7 produced by a supplier who also provided the transformers. 4 of 8 units have gone dim after 4 weeks. I am having the (120 to 12v) transformers replaced with a new brand. Is there a difference in transformer brands? What...
Air Conditioning 24 Volt Transformer Connection
[ 9 Answers ]
Hello: I have a two story addition on my house built by the previous owner. There is one thermostat upstairs and one thermostat downstairs. The system directs air to the downstairs through a damper. The upstairs thermostat controls the temperature and the downstairs one appears only to turn on a...
Tstat wiring - dual transformer, 1 "R" connection
[ 1 Answers ]
I have a dual transformer system - one for heat, one for cool. The Thermostat I'm replacing has an Rc and an Rh connection. The new Thermostat has a single R connection. The transformers are in phase With each other, however, the heat one puts out 24vac, while the Cooling one is at 26.7vac. Can... View more questions Search
|