 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I read https://www.askmehelpdesk.com/heating-air-conditioning/c-keeps-blowing-fuse-95884.html which was very informative. My issue is with a Carrier Weathermaster 8000 furnace and York AC. The heat works fine, the fan only works fine, I turn on the AC and the LED blinks code 34. I replace the...
Is it possible to connect secondary windings of scott connected transformer in series to have 0 degree phase shift and at the same time input line should balance.
I'm trying to replace my panel board but after the meter, there is no main switch. Do I have to call my utility company to de energized and install the new panel or a certified electrician can do it energized?
Good evening, I have a question. My ac has been out for the past couple of days. I just had a technician come to my house and fixed my problem. First, my ac was not working at ALL, I mean the fan will not come on or with ac- NOTHING was working. The technician used his handy voltage wiring...
Hello: I have a two story addition on my house built by the previous owner. There is one thermostat upstairs and one thermostat downstairs. The system directs air to the downstairs through a damper. The upstairs thermostat controls the temperature and the downstairs one appears only to turn on a...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
