Ask Experts Questions for FREE Help !
Ask
    kristyshouse's Avatar
    kristyshouse Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Feb 6, 2012, 02:45 PM
    I have a Intertherm electric furnace where does the wires for the fan motor go?
    To one of the breakers or other two boxes ?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Feb 6, 2012, 04:30 PM
    Is this a new furnace install? Or a new motor replacment?
    kristyshouse's Avatar
    kristyshouse Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Feb 7, 2012, 02:56 PM
    Neither. 2002 model.. Intertherm Electric
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #4

    Feb 7, 2012, 05:16 PM
    Why was the wire unhooked? Either way, you will need to follow the wiring diagram located somewhere in the furnace or on one of the furnace covers to see where the wire should be hooked.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Intertherm electric furnace fan won't shut off [ 1 Answers ]

I started having trouble with it tonight. It has worked fine over the past month, but now it keeps running. I tried to open the furnace box to look for the linit switch, but I'm old and could not get it to open nor could locate anything. Thanks! Nikita

I am looking for electric fan motor for Homart Wall Furnace Model 867 .72541 [ 0 Answers ]

Intertherm electric furnace [ 1 Answers ]

Can anybody give me step by step instructions for where the furnace wires go from the furnace to the new 60 amp breaker kit for an intertherm electric furnace. Hooked this up yesterday and the furnace is not blowing out hot air only warm?

Intertherm Electric Furnace [ 3 Answers ]

The electric furnace makes clicking sounds (relays switching? ) and feels very warm to the touch, despite a thermostat setting of 60 deg F in July. The fan is set to AUTO and did not run at all. Are the relays shot and requiring replacement?

Intertherm electric furnace [ 3 Answers ]

I have an Intertherm electric furnace model MAC 2260A, serial # F000156739. It only blows cold air, so I am assuming the heating element has failed. I have had great difficulty finding a replacement. Any ideas where I can find one? Should I be looking at something else as the problem, as well?...

View more questions Search