Ask Experts Questions for FREE Help !
Ask
    hilldl's Avatar
    hilldl Posts: 7, Reputation: 1
    New Member
    		  
    #1

    Jan 11, 2012, 03:17 PM
    How do I adjust the screws on my Class 69ES Pressure Switch on my water system
    My adjustment scews are out of wack can you tell me how to adjust them
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #2

    Jan 11, 2012, 04:46 PM
    Hildi, check out this site:

    http://www.hubbell-icd.com/icd/press...les/4269ES.pdf

    I've never fooled with this brand of switch, but the documentation basically says this: There are two nuts. One seems to be rather large and the other is right next to it and seems a little smaller. The smaller one only adjusts cut off pressure. Turn it CW to increase, and CCW to decrease. The larger one adjusts both cut in and cut off at the same time. Again, CW to increase, and CCW to decrease.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do you adjust the pressure switch on a Utilitech 3/4hp Jet Pump? [ 6 Answers ]

I think I messed up the standard adjustment of the Utilitech Pump which is set at 20/40 from the factory. Now I can't get the pump to stay on since I adjusted it? Curious if anyone knew any tricks?

How to adjust the water pressure switchsquared 9013fsg2m4 [ 1 Answers ]

How do I adjust the pressure gage on my water tank? [ 2 Answers ]

Air water lines and well pressure switch newwont adjust bladder tank seems fine [ 6 Answers ]

Switch that turns pump on and off

How do you adjust the gas pressure to the burner on a propane water heater [ 0 Answers ]

I have a new propane water heater. The burner is very noisy. How do you adjust the gas pressure to the water heater?

View more questions Search