Ask Experts Questions for FREE Help !
Ask
    tuabwxo's Avatar
    tuabwxo Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 20, 2010, 05:04 PM
    How do I adjust the pressure gage on my water tank?
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #2

    Sep 20, 2010, 06:44 PM

    You don't. Pressure gauges generally don't need adjusting.

    Are you saying you want to raise the pressure on your system?
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #3

    Sep 20, 2010, 07:26 PM

    Are you asking how to adjust the pressure switch? The gauge is not adjustable.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Causes for well water pump low pressure at gage [ 3 Answers ]

The well water pump (and all of water treatment system components) is about two months old and has been working fine. However, yesterday the gage pressure read 40 PSI, even though it had been set and working at 50 PSI all this time. Last night while, taking a shower, the water pressure was fine for...

My water pump pressure shows 32, is the gage broken? [ 2 Answers ]

I just replaced my water pomp, the water tube and the wiring. Everything is working fine except this weekend, the pressure stays at around 32. Even though the gage shows around 32, I feel it is still at around 50. When I run the water, it takes a while to reach the 30 and then the pump turns on... ...

Air water lines and well pressure switch newwont adjust bladder tank seems fine [ 6 Answers ]

Switch that turns pump on and off

Water pressure gage reading [ 3 Answers ]

I live in a townhouse with city water. My water pressure gage was reading 225 psi which had been rising for the past two years. Two days ago one of my overhead sprinklers started leaking so had to have it repaired. Two years ago another sprinkler pipe got a pinhole leak in it. The repairman said...

Need to change pressure gage on water tank. [ 2 Answers ]

My old gage has some water on the inside of the dial,and I need to change it. There's no shut off valve on the line coming in from the water pump to the tank so ill have to turn the pump off and drain the tank to replace the gage. I believe my tank has an air bladder because there's a valve on top...

View more questions Search