Ask Experts Questions for FREE Help !
Ask
    Edward76's Avatar
    Edward76 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 2, 2012, 09:15 AM
    Robert shaw model 9610 thermostat turns off before reaching set temp
    Why doe the thermostat turn off before reaching the set temp, I set temp at 71 but it turned off at 68
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Jan 2, 2012, 09:53 AM
    Probably just out of calibration,, not a lot can be done. If you want it to be 71 degrees in home try setting tstat 3 degrees above what you want it to be
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Robert Shaw 9420 cannot set temp for the heater [ 1 Answers ]

Just moved into a new house and it has the Robert Shaw 9420 system in place. During the warm month the AC worked perfect but since it has started turning cold(low 40's) at night I have been unable to set the temp for the heater. No matter what temp I set it the heater keeps running until I manually...

Burner comes on and goes off before reaching temp, set on the thermostat [ 1 Answers ]

My furnace model# is concord 90 High eff c2e24b-24, The thermostat call for heat the burner comes on for 15 sec and goes off. This happens 6 or 7 times and it shuts off. What should it do to correct it

Robert shaw thermostat eheat setting [ 1 Answers ]

We recently bought a home with a robert shaw 303 thermostat controlling our heat pump and air handler. We had a number of trades in doing some renos and I think they have adjusted the heat. I was leaving set as it was by the previous owner. My concern is that when I look at the display, I don't...

Central heat not reaching set temp and turns off [ 2 Answers ]

Thermostat set at 75 but showing 65 in the house heat will run but turn off not reaching what is set on thermoststat turns off for 1 minute and turns back on not heating to maximum.

Robert Shaw model #9420 flashing [ 1 Answers ]

Cannot get thermostat to do anything except turn on ?off the fan. Display is flashing. Pressing the light button does not even turn on light

View more questions Search