Ask Experts Questions for FREE Help !
Ask
    aconnors's Avatar
    aconnors Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 23, 2009, 02:59 PM
    Robert shaw thermostat eheat setting
    We recently bought a home with a robert shaw 303 thermostat controlling our heat pump and air handler. We had a number of trades in doing some renos and I think they have adjusted the heat. I was leaving set as it was by the previous owner.
    My concern is that when I look at the display, I don't know what the "eheat" setting should be. The red led on top is on quite a bit so I think the emergency heat is suppling heat rather than the heat pump. I don't know anything about this thermostat and have no manual. What should the "eheat" setting be? We would normally keep the home at 18-20 degrees celsius and the current setting for eheat is 10 degrees C.
    Any help is appreciated.
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Dec 23, 2009, 06:53 PM

    If your aux heat is kicking on at 10c=50f. You have a problem with your heat pump. The heat pump should not have a problem keeping up at that temp. On the other hand if you play with the thermostat turning it up and down its easy to bring on the aux. heat.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Questions about robert shaw 9620 thermostat [ 1 Answers ]

There are two temperatures being shown on the display screen of a Robertshaw 9620 thermostat. I know one of them is the room temperature (larger of the two) but what is the other temperature that is being shown?

Robert Shaw model #9420 flashing [ 1 Answers ]

Cannot get thermostat to do anything except turn on ?off the fan. Display is flashing. Pressing the light button does not even turn on light

Wiring a Robert Shaw 3210 Thermostat [ 4 Answers ]

How do I wire up this new Robertshaw 3210 Thermostat? I have a gas, forced-air furnace. The wires coming out of my wall are labeled: RC, Y, W, G. The new Robertshaw 3210 thermostat has these connectors: R, C, L, O, B, W2, E/W1, Y1, G Which wires go to which connectors? Do I need to add some...

Change out old thermostat with a Robert Shaw RS5110 [ 1 Answers ]

I currently have a General Controls T-90 thermostat and I want to switch that with a RobertShaw RS5110. My current Thermo is wired with a Green wire going to F a Black wirre going to C a White wire going to H and a Red wire going to M. There is no diagram for this configuation. Does anyone have...

Robert Shaw thermostat 9620 how to hook up? [ 11 Answers ]

I have a Robert Shaw 9620 7 day Programmable digital thermostat 2 heat/2 cool . We have a Goodman heat pump I want to know how to hook up this thermostat to my 7wires coming in, the 7 wires are as follows yellow blue red green white brown orange. I need to know where all these wires go to in the...

View more questions Search