Ask Experts Questions for FREE Help !
Ask
    mcraver76's Avatar
    mcraver76 Posts: 2, Reputation: 1
    New Member
     
    #1

    Dec 25, 2011, 08:46 AM
    Condenser Fan Motor Replacement with circuit board
    My previous moter had a 3 wire set up. 1 to the capacitor, 1 to the contactor, and 1 to the circuit board. The new motor has 4 wires diagramed out for 2 wires to the capicitor, and 2 for the line.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #2

    Dec 25, 2011, 09:12 PM
    Did you get a new capicitor with the new motor? Chances are the new motor takes different size than the old one, lable on side of motor should tell you the new correct size.
    Tag the brown and brown/white stripe, one to each of the 2 posts on capicitor
    Tag each of the other wires one to each side of the contactor
    mcraver76's Avatar
    mcraver76 Posts: 2, Reputation: 1
    New Member
     
    #3

    Dec 26, 2011, 06:39 AM
    So I shouldn't be terminating any wire from motor to circuit board?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Condenser fan motor replacement [ 3 Answers ]

I have a Rheem heat pump and have purchased a replacement condenser fan motor. It had an Emerson KA55HXPAM-7255 and was crossed over to an A O Smith ORM 1008. My problem is the wiring, the new motor has one more wire than the old one. I had orange, brown, black on the old one. The new one has...

Condenser Fan Motor Replacement [ 9 Answers ]

I’m attempting to replace the condenser fan motor on a Trane XB1000. It originally came with a .25 hp GE motor with mounting stud that are about 3 inches apart. The only suitable replacement that specs out (type, volts, amps, rpm, etc.) is an AO Smith unit, but the mounting studs are about 3.75...

Condenser fan motor replacement? [ 0 Answers ]

Ac small motor condenser fan to be replaced in jewitt blood bank refrigerator

Condenser fan motor replacement [ 2 Answers ]

I had to replace condenser fan motor with new and new motor has more wires than old one. Please tell me how should I wire it? The old motor had only 3 terminal. Black was connected to AC circuit board with relay Purple was connected to dual capacitor common Brown was connected to ducal...

Condenser Fan Motor replacement [ 1 Answers ]

I have had to buy a replacement condenser fan motor for my weather king model WAKA-037JAZ. The old motor was a 3 wire motor and the replacement motor is 5 wires. How do I hook it up to the capacitior? What wires to what connector?


View more questions Search