Ask Experts Questions for FREE Help !
Ask
    prakash_patel79's Avatar
    prakash_patel79 Posts: 2, Reputation: 1
    New Member
     
    #1

    Sep 16, 2010, 11:16 AM
    Condenser fan motor replacement
    I had to replace condenser fan motor with new and new motor has more wires than old one. Please tell me how should I wire it?

    The old motor had only 3 terminal.
    Black was connected to AC circuit board with relay
    Purple was connected to dual capacitor common
    Brown was connected to ducal capacitor fan terminal

    The new motor has 4 terminal
    Brown
    Brown with white strip
    Black
    White
    flstf's Avatar
    flstf Posts: 1, Reputation: 1
    New Member
     
    #2

    Sep 16, 2010, 12:30 PM

    Brown is Capacitor Only
    Brown with white stripe ( Is actually the same wire as the white wire) White is power black is power-Hook your Black where Black was, Brown where Brown was- Brown with white strpie on common, leave the white disconnected
    prakash_patel79's Avatar
    prakash_patel79 Posts: 2, Reputation: 1
    New Member
     
    #3

    Sep 17, 2010, 07:17 AM
    Hello FLSTF,

    Thanks for the help, it did worked.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Condenser Fan Motor replacement [ 1 Answers ]

I have had to buy a replacement condenser fan motor for my weather king model WAKA-037JAZ. The old motor was a 3 wire motor and the replacement motor is 5 wires. How do I hook it up to the capacitior? What wires to what connector?

Condenser fan replacement [ 2 Answers ]

My old fan motor has brown wire, black wire, green wire, and a yellow wire. Th new motor has 2 brown wires (one with a strip) black wire, white wires. I am lost

Rheem condenser fan motor replacement [ 1 Answers ]

I have 2.5 ton 6.7 seer rheem AC unit. I need condenser fan motor. Old motor info is all worn out. How to find which motot I need? RPM, Amps, Horspower,208-230VAC, shaft diameter I can measure. Can you help?

Fan condenser motor [ 1 Answers ]

I'm trying to find a specific Emerson cond. Fan motor HQ 1086485EM and have not been able to find on any sites Any suggestions?

Condenser fan motor overheats [ 3 Answers ]

:mad: replaced condenser fan motor that overheated and new motor overheats and thermally shuts down. Also replaced capacitor. The motor is properly grounded and spins in the correct direction. It seems like there still is a voltage problem. Any ideas?


View more questions Search