Ask Experts Questions for FREE Help !
Ask
    nomad1425's Avatar
    nomad1425 Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 20, 2011, 07:33 PM
    Evcon furnace electronic igniter, burner problem
    Electronic igniter glows & fires up the burners but both the burners & igniter only stay on for a few seconds. This ignition cycle repeats three times before completely not working. Is this a bad igniter or something else?

    Thanks
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #2

    Dec 20, 2011, 08:24 PM
    Must be something else, if the igniter comes on and glows, its not likely bad
    I would remove flame senser clean with steel wool or very fine sandpaper and reinstall turn furnace back up and see what happens

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman evcon furnace burner? [ 1 Answers ]

Coleman evcon furnace, glow light glows but the burner doesn't light.

Armstrong gas furnace burner problem. [ 0 Answers ]

I have an armstrong gas furnace running on propane. Occasionally when the burner ignites a flame will burn inside one or more of the burner tubes. Any ideas?

Coleman Evcon propane electronic furnace [ 0 Answers ]

My Colman Evcon furnace, the draft fan keeps running all the time ,it never ever shuts off. Got any ideas ? The furnace works fine other wise.. Thanks

Colman Evcon furnace burner shutting off [ 2 Answers ]

Hi... my model DGU08012UB is having an issue. The induction motor comes on,ignitor lights burner and the burner runs for 3-5 seconds and shuts down. The induction motor continues to run. The burner will not come on again. If I power it down,it repeats the cycle. I do not see any diagnostic error...

Coleman Evcon Furnace igniter [ 1 Answers ]

We have had to replace the igniter in our furnace at least 4 times in a little over a year. What could be making them burn out? We had two go out in just one weeks time! This was 12-25-07. We had a new one installed late April of this year so it wasn't used that much. We turned the furnace on last...


View more questions Search