 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I am hooking up a new GE downdraft cooktop. 4 wire to 3 wire.
The wires from the junction box that the previous GE downdraft cooktop were hooked to are (Black, White, and Bare). The new GE instructions do not list anyway to hook to these. The new cooktop has Black, Red, White, Green. Please tell me that my issue is different than the other one I saw posted on here and it will work. I am hoping I can connect the Black to Black, the White to Red, and the Bare to White and Green?
My circuit cable says: E30445 (UL) AWG10 CU 2CDR WITH AWG 10 GROUND TYPE UF-B 600 VOLTS Thanks in advance! |
||||
Check out some similar questions!
How do I wire a 4 wire cooktop to 3 wire house
[ 6 Answers ]
Hello, I am trying to wire a 4 wire cooktop to a 3 wire feed from the house. Wires from Cooktop; White, Black, Bare, Red Wires from house; White, Black, Bare Which wires should I connect to which? Thanks!
Wiring a 3-wire cooktop into a 4-wire box
[ 11 Answers ]
Hello, I need to replace our GE profile glass cooktop because the glass itself shattered. I found a very similar used cooktop. However, the cooktop I'm taking out has 4 wires, black, white, red and bare copper. The one I'm putting in has 3; black, red and bare copper. Do I just match colors and...
3 wire cooktop to 4 wire supply box
[ 1 Answers ]
What is the right way to connect a Dacor electric cooktop with 3 wires (red/black/green) to a supply box with 4 wires (red/black/white/bare copper)?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
