Ask Experts Questions for FREE Help !
Ask
    Holexi05's Avatar
    Holexi05 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 14, 2011, 05:04 PM
    Miller furncace questions?
    I have a miller furnace. Every 8-12 hours the 4th flame will not light resulting in it to shut down. We have cleaned the vents, fan & cleaned the flame sensor.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Dec 14, 2011, 06:12 PM
    Clean the orifices, burners, and cross igniter bar. The cross igniter bar is the area where the flame goes across to light each individual burner. Let me know how things work out.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Error code 31 on my bryant plus 90 furncace [ 0 Answers ]

I woke up this morning to no heat. I went down and started searching on the web for answers. I checked all the rubber hoses and they all seemed very clear and air tight. I found someone with the same furnace and same furnace. The tech told him to bypass the pressure switch. Before I did so, I...

Looking for by amy miller [ 0 Answers ]

I am trying to find healthy snack ideas, for my babysitter and 4 yr old while I am at work We do normal but thought about some fun things . I did find a website that has some fun and healthy ideas But need more any suggestion I am looking for things like these but any help would be great...

I have a goodman gmp075-3 gas furncace. [ 0 Answers ]

The main fan does not turn off after the burners stop. Sometime it works and other times it does not. It will also turn on when the buners are not lit and run for long periods. I have been manually turning the furnace off and on. I have replaced the ingnitor and kept it very clean and that does not...

2 wire furncace to multiple port thermostat [ 0 Answers ]

About seven years ago I bought a new thermostat with several ports, and some how I got onw wire connected to the "G" port of the thermostat and the other wire connected to the "RH" port. It worked and sometimes failed. My furnace did work this year, so I replaced the thermocouple, and it did not...

Miller furnace [ 1 Answers ]

I have no pilot light. The burner lights on full capacity at all times.

View more questions Search