 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Error code 31 on my bryant plus 90 furncace
I woke up this morning to no heat. I went down and started searching on the web for answers. I checked all the rubber hoses and they all seemed very clear and air tight. I found someone with the same furnace and same furnace. The tech told him to bypass the pressure switch. Before I did so, I got no glo from the igniter. After following his instructins, the igniter kicked on, but only for about five seconds. Does this mean that the pressure switch is bad, or are there other things to check? Please help, I can't afford a tech to come to the house if I can fix it myself. Thanks so much, Ken
|
||||
Check out some similar questions!
Hello! I'm new on here so bear with me. I found a similuar post on the Bryant 80 but I believe I have a different model... not sure how much that matters. The only model number I could find on the unit was CK5AXA036017AAAA The Error code is 33 Limit or flame roll out switch is open. The furnace...
We have cleaned heat sensor and get the same code. In a previous post it was suggested that there may be a problem with the burner jet? Can you help? We are hitting below freezing temperatures tonight and do not want to wait until morning to call a service tech.
I have a Bryant Plus 90i furnace flashing error code 43. I'm pretty good at fixing it so far. It's 17 years old and I've replaced the blower and inducer motors. All that seems to be fine. I just check the ususal. New filters are in to give max airflow. Checked and cleaned the condensate trap...
Ok, the furnace stopped working this morning. Need some help. The flame goes on, but turns off after a minute. The LED flashing code on the motherboard says 3-1 (31 - which is the high heat pressure switch -- also says to refer to error code 32 which is the low heat pressure switch). I turned the...
Bryant Plus 80 furnace - Error code 31 What are the corrective measures to put this furnace back to producing heat? There is power, the fan works but there is no heat. We lost power recently but it worked after that. Last evening there were high winds which were indicated on the code...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
