Check out some similar questions!
Wire multiple lights on one switch
[ 36 Answers ]
I have wired a switch at the end of a circuit with three lights . One light turns on and off with the switch , the other two remain on all the time. How can I make all the lights turn on and off with the switch. I have already enclosed 14-2 wire in the ceiling between the lights. Is there any way...
I'm replacing an old 2 wire thermostat with a Hunter (#44155C). Wire placement?
[ 3 Answers ]
I'm not sure of the wire placement. I have a black and white wire attached to my old thermostat. The new thermostat has attachments labeled G, RC, Rh, Y/O, W/B, Y1. There is a jumper connecting RC and RH. Do I connect the black wire to RH and the white wire to W/B? Any help would be greatly...
How to wire multiple lights to one switch
[ 12 Answers ]
How do you wire a circuit for five recessed lights between two three-way switches so that the lights can be dimmed?
How to wire 3 wire 2 zone cooling only to Honeywell thermostat
[ 10 Answers ]
I currently have two zones for cooling only and the thermostat wires are red, blue and white. The red is labeled Rc which is easy, the white is labeled W Heat (this doesn't make sense to me) and the blue is labeled cool? What I think I need to do is connect the red to the Rc on the thermostat,...
Replace data/fax port with firewire port
[ 2 Answers ]
I want to buy a dell inspiron 531 computer from costco. It has a TV tuner and a 56K PCI Data/Fax Modem. I know the TV tuner uses one of the two available pci slots, but does a data/fax modem use anothwer pci slot? I want to have an open pci slot so I can add a firewire port. If the data/fax uses a... View more questions Search
Add your answer here.
|