Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do I turn off the circulating fan on a Heil SP80 furnace?
[ 0 Answers ]
Circulating Fan blows constantly and I would like to turn it off. We have a 10 year old Heil SP80.
Heil sp80, blower motor fails to run
[ 0 Answers ]
I own a Heil SP80 residential furnace. Just recently, I noticed the blower motor(room air circulation) failed to run after the furnace ignited and heated the heater box. When I manually rotated the blower motor fan to get it started the blower motor would run on its own but only at low speed... I...
Heil SP80 Won't Ignite
[ 11 Answers ]
Last night when I went to bed the furnace was working fine. The power flickered on and off all night, and at 5 am I woke up freezing my butt off. It was 52 degrees in my house. I can hear it the furnace running, but it is not blowing any heat through the vents in my house, nor is it taking in...
Heil sp80 gas settings
[ 4 Answers ]
Good Day: Our furnace is a Heil SP80 model #NU65100BFB2, 100K BTU output, converted to LP gas. The main gas valve failed (Honeywell SV9500M 2682, converted, dead solenoid) We have just put in a new main gas valve (Honeywell SV9501 M2056), and personally put in the gas conversion from NG to...
Heil sp80 gas settings
[ 1 Answers ]
Good Day: Our furnace is a Heil SP80 model #NU65100BFB2, 100K BTU output, converted to LP gas. The main gas valve failed (Honeywell SV9500M 2682, converted, dead solenoid) We have just put in a new main gas valve (Honeywell SV9501 M2056), and personally put in the gas conversion from NG to... View more questions Search
|