 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I hear a hissing noise coming from the inducer motor and the pilot does not come on what can the issue be
Last night when I went to bed the furnace was working fine. The power flickered on and off all night, and at 5 am I woke up freezing my butt off. It was 52 degrees in my house. I can hear it the furnace running, but it is not blowing any heat through the vents in my house, nor is it taking in...
Good Day: Our furnace is a Heil SP80 model #NU65100BFB2, 100K BTU output, converted to LP gas. The main gas valve failed (Honeywell SV9500M 2682, converted, dead solenoid) We have just put in a new main gas valve (Honeywell SV9501 M2056), and personally put in the gas conversion from NG to...
Good Day: Our furnace is a Heil SP80 model #NU65100BFB2, 100K BTU output, converted to LP gas. The main gas valve failed (Honeywell SV9500M 2682, converted, dead solenoid) We have just put in a new main gas valve (Honeywell SV9501 M2056), and personally put in the gas conversion from NG to...
The electric igniter does not ignite when the furnace should. The blower works fine, and is the first thing that goes on when the furnace is on for a heat. When I press on the wiring connector that goes into the valve the igniter then gets red hot and then the fire begins. I was wondering if...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
