Ask Experts Questions for FREE Help !
Ask
    Lostpoptarts's Avatar
    Lostpoptarts Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 10, 2011, 08:33 PM
    Installing aspen 3 piece bathtub
    How do you measure the hole for the fosset, the taps, and then how do you put the bath tub in once all fosset and taps are installed since it is a closed in bathroom, no access to the plumbing.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Dec 11, 2011, 07:42 AM
    What do you have in there now? Back tom you, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Installing 2 piece tub/shower [ 9 Answers ]

Help, at my parents rental property, I agreed to help them remodel. The vanity and toilet are out, as is the old fiberglass tub/shower. Today's question. The fiberglass tub has a lip on the fixture, side, and back edges that looks like a piece of 1 by 3 will support. Only the room side...

Installing new 2 piece tub/shower [ 1 Answers ]

I am installing a new combination tub and shower in an alcove (3 walls surrounding tub). The instructions tell me to install the valve body first. After the valve body is in place, how do I get the tub into the alcove as the valve body extends out from the wall about 3 inches?

Installing a one piece shower stall [ 6 Answers ]

I am installing a one piece shower stall in my shop, it is a 32" stall and i have one outside wall and still have to build the inside wall. How do I rough in the stall. My vanity and stool are all on the inside wall in a line with the shower. With the wall i am building it will be about 1" away...

How do I remove a one piece bathtub/surround [ 1 Answers ]

How do I remove a one piece bathtub/surround

Installing a 3 piece drain for a remodel. [ 4 Answers ]

I can't seem to find any directions on how to install a 3 piece drain kit. The drain pipe and drain kit are both ABS. It will go in for a second floor shower. It looks like it should just be cemented on top of the 2 inch pipe that's already there. I need to know if it needs to rest on the...

View more questions Search