Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Waste pipe above an electrical panel.
[ 3 Answers ]
Hi guys: I am wondering if you can quote me the exact NEC requirement for waste pipe/water pipe clearances ABOVE an electrical panel? I want to run a 2" waste pipe in a joist bay just to the right of an electrical panel... see image below. The pipe continues in the joist bay until it connects...
Why would steel sewer pipe be lined with a nylon sleeve on the outer side?
[ 1 Answers ]
Pumping main sewer. Our 225mm steel sewer main is to have a tee inserted and we have excavated and found a nylon sleeve around the pipe. Prior to cutting into the pipe I would ask what would be the need for such?
Water Pipe above Electrical Subpanel
[ 9 Answers ]
Does the NEC permit water pipes to be routed above an electrical panel? I would be running Pex water pipes above it. I am limited to where I can put the subpanel and water pipes.
Foundation sleeve seal
[ 2 Answers ]
The 2004 Florida building code requires any pipe passing through a foundation or under a footer to be sleeved by a pipe 2 pipe sizes larger or install a relieving arch. I'm installing a 3" pvc dwv under my footer fully surrounded with soil through a 4" thin-walled sewer drain pipe that will pass... View more questions Search
|