Ask Experts Questions for FREE Help !
Ask
    alexzrodriguez's Avatar
    alexzrodriguez Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 8, 2011, 03:47 PM
    Goodman gmp 050-3: blower starts before draft fan
    I have a Goodman GMP 050-3 gas furnace which worked fine last winter/spring. Nothing has changed and now the furnace fails to ignite. When I set the thermostat for heat, the blower motor immediately starts while the draft fan motor doesn't and of course the furnace doesn't ignite either. Blower will run for a minute or so and then turn off. Status LED is not blinking or flashing. One odd thing that was happenind this summer while the A/C was running... I could hear the draft fan intermittantly turn on and off randomly.

    Any tips on what I can check out?

Check out some similar questions!

Goodman GMP 050-3 furnace Blower Not Running [ 2 Answers ]

I have a Goodman gas furnace model #GMP050-3 Rev B that was put in service in 2002. The blower fan motor has stopped working and I need help troubleshooting it. It was working fine until a week ago when I noticed an electrical burning smell in the area it services. Now, when the thermostat calls...

Trouble shooting GMP Furnace draft blower motor slow starting [ 2 Answers ]

My exhaust draft fan has started giving me problems. The fan doesn't always come on and the furnace won't run. Sometimes the fan tries to turn but just barely and is real warm to the touch. When I can get it to spin it seems to be OK. I'm wondering if it is the capacitor or the motor? Any help...

Goodman gmp 050-3 1993 Model [ 1 Answers ]

Furnace was running fine the all the Sudden Stopped The Unit comes on the first stage vacume blower comes on then the Ingitor Comes on Heats up fine but gas is not opening and entering the tude to ingiagte and Start the Second Blower No Gas Enterneing pas the Gas Valuve . Check the...

Issue with Goodman GMP series gmp 050-3 [ 18 Answers ]

Hello everyone, I have an issue with my furnace. It just recently started happening, when running the ac the unit gets to the set temperature and then the unit clicks as if where going off and clicks again and keeps running. I looked inside and didn't see the status light blink.. Any help here?

Goodman GMP-75 or 50 Blower Replacement [ 1 Answers ]

Does anyone have the procedure for replacing the blower in a GMP-75 furnace? The only access is the front of the unit and it looks next to impossible to get the securing screws out. I'm wondering if there is a written procedure for doing this. Thank you, Jimmy Baskerville

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.