I have 4 wires from my old thermostat and I'm installing a model 44360

Check out some similar questions!

Replacing a Janitrol thermostat with a new programmable Hunter model 44360 for single [ 3 Answers ]

-------------------------------------------------------------------------------- I would like to know about replacing a Janitrol thermostat with a new programmable Hunter model 44360 for single stage heat pump with emergency electric backup. The terminal labels on the janitrol are : Y, G, R,...

I just purchased a hunter thermostat, model 44110. I only have two wires, a white and [ 1 Answers ]

I just purchased a hunter programmable thermostat, model 44110. I only have two wires, a white and a red from the old mercury thermostat. Where do these tow wires hook up? I tried the red with the w, and the white with the RC, leaving the jumper that was factory placed between the RH and RC. I...

Installing programmable thermostat .wires [ 1 Answers ]

I have a new Honeywell thermostat to install when I take the wires off the old unit there are 5 wires. The coors are Red, White, Yellow, Blue and Green. I can hook up the first 3 to the new Thermostat but on theinstructions it has a Rh (R heating)spot and a Rc ( R cooling) I don't knowif the blue...

Didn't label the wires when installing a new digital thermostat [ 3 Answers ]

I removed my old round dial thermostat and did not label the wires. It's a 5 wire system. When I went to install the new Honeywell digital thermostat I realized I didn't know which wires went where. I have these color wires - Blue, Red, White, Green, Yellow. The digital thermostat has places...

I think I shorted contact wires for digital thermostat while installing. [ 3 Answers ]

Actually, I know I shorted it! I was installing a ritetemp therostat. C-Blue G-Green Y-Yellow W-White R-Red It seemed pretty straight forward.

View more questions Search

Check out some similar questions!

Add your answer here.