Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installing programmable thermostat?
[ 4 Answers ]
I just purchase a new Honeywell RTH4300B programmable thermostat for my oil furnace. My old thermostat was a White-Rodgers and was connected with 2 wires; one red and one black. There was no coding on the terminals and everywhere I look they are always talking about a red and a whir wire. I think I...
Installing a programmable thermostat
[ 1 Answers ]
Im having a problem installing my new programmable thermostat. The connected wires on the old mercury one are Y, Rc, W, B, G. The ones on the new one are G, Rc, Rh, Y/O, W/B, Y1 and I can't figure out where to put them off the diagram that they sent in the package.
Installing Programmable thermostat
[ 2 Answers ]
We have moved into a home that had no furnace, and we are installing a carrier brand furnace, and have a programmable thermostat to install. We have had this thermostat for a while, so I have lost the installation instructions. Every thing I have found on the net say to label the wires when...
Installing a Programmable Thermostat
[ 1 Answers ]
I have a 10 year old Carrier thermostat and want to install a new programmable thermostat. The thermostat has 5 wires (red, yellow, green, blue and white). All of the programmable thermostats only instruct you on how to install with 3 or 4 wires. Does anyone have a suggestion on a...
Noma - Programmable Thermostat - 4 wires
[ 10 Answers ]
Okay.. so here is the deal , went out bought a digital themostat today , the guy at the store told me it would be easy... but I don't think I set it up right because I am FREEZING! I have 4 wires... 1-Red 1-Blue 1-Yellow 1-Green Now.. I attached all the wires correctly... however I am... View more questions Search
|