Ask Experts Questions for FREE Help !
Ask
    peanut97's Avatar
    peanut97 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 25, 2011, 05:28 PM
    Loose bathroom lever handle -how to fix?
    Hi ,
    I recently had installed a Belle Foret(model N130 01) bathroom sink faucet with lever handles. The cold water lever constantly is coming loose(not any issues with the hot water one).I have been popping the cap off the top of the lever and tighting the screw. However I noted that it is only a very tiny amount I can tighten it before the lever can't be moved at all and then after two or three uses , the thing is loose again . Can someone tell how to correct the problem? I may be way off base but is it occurring because the plumber may have forgotten to put in a washer?
    I appreciate anyone help
    Thanks
    Screw loose in Alberta
    theplumber's Avatar
    theplumber Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Oct 25, 2011, 08:00 PM
    The faucet valve needs to be adjusted higher so then you could tighten the handel tighter
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do you fix a LOOSE dispenser CRADLE/LEVER on a GE side by side? [ 0 Answers ]

I have a GE model GESL25JFTABS side by side. The cradle to push for water and ice is loose and not working since the lever is not tight. Anyone know how to fix it?

Delta dual lever widespread handle won't lift off [ 1 Answers ]

A have a dual handle widespread delta faucet and unscrewed the allen screw but handle won't lift off to replace washer or cartridge. Grrr!

The weight came off the stop lever and tub will not drain. How do I fix [ 4 Answers ]

Ok my tub is full of water. I lifted the lever and nothing. I unscrewed the levr it came out without the wiehgt on it. No access panel and it is a tub and shower inclosure how do I fix this

How to fix a sticking delta shower lever [ 1 Answers ]

When turning on the single control lever of the shower I usually turn it all the way to hot then adjust it to cooler temp... it is sticking on hot even when turned to cold... even feels as if it gets hotter... If I turn it all the way off.. then turn to warm temp it seems to work okay.. any...

I have a Weedeater Featherlite blower. The top handle has pulled loose. Fix? [ 1 Answers ]

It appeared to be a glued connection. I reglued it with garilla glue. This lasted for about three uses, and it broke loose again. Is there a permanent fix for this poor design ?

View more questions Search