Ask Experts Questions for FREE Help !
Ask
    plumbconfused's Avatar
    plumbconfused Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 12, 2010, 03:10 PM
    Delta dual lever widespread handle won't lift off
    A have a dual handle widespread delta faucet and unscrewed the allen screw but handle won't lift off to replace washer or cartridge. Grrr!
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Dec 12, 2010, 03:25 PM
    This is not uncommon in an older faucet. Corrosion builds up between the handle and the stem. Try squirting a little pentro or WD40 in the allen hole, let it sit a while and wiggle the handle back and forth while pulling up.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My Delta lever tub faucett want shut off my water [ 0 Answers ]

My Delta one lever faucett to my tub- When we turn on the water it will not shut off. We have changed the washers and two weeks later we are having the same problem. We are having to shut off the water by using the main water breaker. Help I do not want to call a plumber.

How to fix a sticking delta shower lever [ 1 Answers ]

When turning on the single control lever of the shower I usually turn it all the way to hot then adjust it to cooler temp... it is sticking on hot even when turned to cold... even feels as if it gets hotter... If I turn it all the way off.. then turn to warm temp it seems to work okay.. any...

John Deere 160 Down-Stop lever and Lift Lever [ 1 Answers ]

I have a John Deere 160 lawn tractor. I need a good diagram of the spring attachment for the Down-Stop lever. The Lift lever is stuck and the mower deck does not move up or down correctly. Do you have a diagram to place the down-:confused: stop lever return spring in the proper location. I do...

View more questions Search