Ask Experts Questions for FREE Help !
Ask
    rudy001's Avatar
    rudy001 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 18, 2011, 11:12 AM
    Valve body in wall pics
    Any pictures of valve body install in wall to shower, piping to valve body
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #2

    Oct 18, 2011, 11:23 AM
    Here is one... It is tub / shower combo with diverter spout. It is roughed in for hand-held shower, that's why the shower outlet is on a side. But if you have regular, fixed shower head then you just extend that pipe straight up to the height of about 6'10"
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Possible shower valve body leak [ 3 Answers ]

I have rebuilt the valve on my three handle shower stems and they still leak cold water out of the spout. I switched the cold with the hots stem and it continues to leak cold water. Is it possible that the valve body on the cold side in deterated? If so can it be replaired without replacing the...

How do I add wall thermostat 2 my wall heater valve,Dayton 3e290.No wires on valve [ 1 Answers ]

I have a gas wall heater and the only way to turn on and off is to open bottom of heater and turn the knob on the Dayton 3E290 valve. I want to be able to run a wall thermostat but there are no places to add the wires. What can I convert the valve to so it accepts the remote thermostate Thank you

Shower valve body [ 1 Answers ]

I'm installing a new shower in an addition and purchased a new shower kit from Price Pfister. The shower valve is going into a 2x4 wall. The question I have is do they make different sizes of valve bodies because the one I have, when installed according to instructions, will only allow for about...

View more questions Search