Ask Experts Questions for FREE Help !
Ask
    Phil1442's Avatar
    Phil1442 Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 15, 2010, 10:04 AM
    Goodman Model# CAPF3030B6BA?
    Hello,

    I live in Pittsburgh where it is currently about 15 degrees. I just had a Goodman Model# CAPF3030B6BA newly installed. I have the temperature set on 68 when I'm home and 65 at night and when I'm not home. I have observed that the first floor warms to the selected temp but the second floor holds steady at around 61. My contractor tells me I need to adjust, i.e. close off the dampers in rooms that I don't use as much to get more heat where I want it.

    My question is; shouldn't a newly installed system, if properly sized heat the entire home without having to be making trips to my basement to manually adjust dampers?

    Please advise.

    Thanks!
    Phil
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Dec 15, 2010, 03:29 PM
    Hi Phil, the system only puts out heated air, it doesn't direct the flow. Whoever put in the new system should have done a test and balance before leaving. The solution may be as simple as closing the first floor registers down a bit and opening the second floor ones. Closing off registers rarely works because it disrupts the flow of air through the house.
    annescrap's Avatar
    annescrap Posts: 1, Reputation: 1
    New Member
     
    #3

    Sep 27, 2011, 10:50 AM
    Where do I change the filter in my CAPF3030BBA furnace?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman Model # ERUF303016AA [ 0 Answers ]

I have a Goodman model # ARUF303016AA, I have the thermostat set at 75 degrees and on the "ON" fan. ( If not set to ON it won't run, for more then 10 minutes at a time) However it never reaches the 75 degree mark. It makes it to 74 during the day/ evening, then at night / overnight it only gets...

Goodman ac model cpke30-18 [ 1 Answers ]

Can you tell me the color wiring for my goodman ac model cpke30-18

Goodman gds80703axbb 07 model.. [ 3 Answers ]

Goodman gds80703axbb 07 model.. goes like this ,I get a call ,unit is downflow in closet and is in lockout. I retry,suspect flame sensor,cleaned it real good, no go.Had a look at the board,burnt spot on it,advised owner maybe he should have an electrician out to find why I have voltage on my...

Goodman model gmpn080-4 [ 4 Answers ]

Have a goodman model gmpn080-4 I lost blower limit pressure switch previously and seemed to be the same thing, ordered part and still does same thing. Thought it may have had a vacuum leak so I sealed the edges, as long as it is not connected (securely) to the exhaust pipe it runs fine. As soon as...


View more questions Search