Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replace lid switch on whirlpool washing machine model # LSQ9010PW2
[ 2 Answers ]
Washer stopped working. Will fill up but does nothing after that. I was told it is most likely the lid switch so I replaced the lid switch and that did not fix the problem. No matter what setting I use (other than fill), nothing happens -- no noise, no action, nothing. Tried opening and closing...
My kenmore washing machine will not complete the wash cycle without slaming the lid
[ 5 Answers ]
To get the washing machine to wash I most often have to slam the lid closed several times.
Open top of washing machine (not lid)
[ 2 Answers ]
I cannot get the top of my Sears Kenmore 300 washing machine to open. It isn't the lid. I need to raise the top to check for something interferring with the water going into the tub. Most washing tops have a thing on each side to push in and pop up the top. This one just sits there. Nothing...
Washing Machine Lid Removal
[ 1 Answers ]
How do I remove the cover of my Kenmore 90 Series Washingmachine to replace the lid switch? It has a lead cable about 18inches long on it so I assume I will have to pull part of the back off also but I cannot see how to lift the top (no visible scews) Please advise.
Tub draining into washing machine?
[ 2 Answers ]
Hi! My front load washing machine occasionally has water (1-2 gallons) in it even though it has not been in use. I suspect the bathroom shower/tub upstairs may somehow be leaking water (draining) into the machine when it receives heavy use. Is this even possible and who should I call, a plumber... View more questions Search
|