 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Delta RP 47422 Cartridges Leaking
I have a Delta Model #35955 two handle widespread lavatory faucet and both hot and cold water are dripping out of the spout, and also from the end valves themselves.
It seems as if the cartridges aren't seating. How does one know if the cartridges are seated correctly? AFter buttoning everything back up, the handles cab't turn the flow off from the spout either. Hot and cold. Help! |
||||
Check out some similar questions!
I have an old delta tub spout. It screws on to the fitting in the attached picture. When the shower is turned on water leaks from the back of the spout. I now have a water spot on the ceiling below. I have cut a hole behind the tub and discovered the leak. I am unable to find a replace o-ring...
Our delta monitor tub faucet leak hot water very badly. We tried replacing the seats and springs but it didn't help. Are now waiting for the faucet "guts" to come in the mail. If this doesn't work any suggestions?
I have two: bathroom and kitchen sink. I understand how to take apart and repair with the exception that I do not know how to remove the chrome multi toothed ring. Does it unscrew and if so, how do you do so without damaging the chrome.
I recently replaced both of the seat cartridges in our lavatory faucet. They work fine now and don't leak anymore. But during the past few weeks they have become more hard to turn on and off. Is there a reason for this that anyone knows of? It almost feels as if something is tightened too much, but...
I have a delta shower that is leaking. I tried adjusting the valve, and it seemed to help, but it started leaking again. I did some research and took the shower trim and such apart... I got down to the valve, and not really sure on how to remove it. I am assuming that you just turn it...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
