Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Dripping Delta tub faucet
[ 3 Answers ]
I have a dripping tub spout that I would like to fix. It is a Delta Monitor, single handle style. I figure I have to pull and replace the valve stem, but have no idea how. The stem looks like it is tightly integrated with the plastic sleeve that surround it. Also, am I correct on the part to...
Old Delta Tub Spout Leaking
[ 5 Answers ]
I have an old delta tub spout. It screws on to the fitting in the attached picture. When the shower is turned on water leaks from the back of the spout. I now have a water spot on the ceiling below. I have cut a hole behind the tub and discovered the leak. I am unable to find a replace o-ring...
Delta Faucet Side Spayer leaking
[ 17 Answers ]
I have a Delta Signature Series WF-440 faucet with a side sprayer that's about 5-6 years old. Developed a leak under the sink, and found out it was coming from where the side sprayer attached to the sink. It is a compression type fitting, and had come apart. I discovered that I could not buy a...
Leaking single handle Delta faucet in a bath tub
[ 2 Answers ]
I have a steady-dripping single handle Delta faucet in an upstairs bathtub. It has a pretty good leak. How do I get to the leak to fix it and what do I need to replace?
Delta Faucet in Tub
[ 4 Answers ]
Sorry for the multiple questions in the same day, but I am at a loss to explain what is going on with my tub's faucets. Currently the cold water side will not stop dripping. I have replaced the stem, the seat on the hot cold and diverter, but it continues leaking. I realize after doing this a... View more questions Search
|