Ask Experts Questions for FREE Help !
Ask
    nealr's Avatar
    nealr Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 5, 2011, 08:04 AM
    Kenmore quiet guard 3 troubleshooting?
    We have a kenmore quietguard 3 dishwasher that has recently been leaving white film or residue on the dishes which does not come off. We know it is not the detergent we are using because we've switched more than once and the same thing keeps happing. Any suggestions?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jul 5, 2011, 09:35 AM
    Make sure you are not using too much detergent? And also make sure the filter screen in the bottom is clear. I have seen pump bodies clogged with granular detergent and the rinse water couldn't clear it out. Use minimal detergent. Try running a couple cycles without detergent to see if that is your issue.
    JimGu's Avatar
    JimGu Posts: 92, Reputation: 4
    Junior Member
    		  
    #3

    Jul 14, 2011, 09:37 AM
    Your pump probably needs cleaned. You can try putting an 8 oz glass of white vinegar on the top rack, upright of course, and running through a cycle. Also make sure your water temp is at 130 degrees or more.
    pgmarton's Avatar
    pgmarton Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Nov 26, 2011, 10:31 AM
    The green light is flashing. Manual refers to the heater circuit. Do I need a technician and what am I looking at in terms of repair bill.
    pgmarton's Avatar
    pgmarton Posts: 2, Reputation: 1
    New Member
    		  
    #5

    Nov 26, 2011, 10:36 AM
    Tried adding white vinegar but the machine won't even start. Is there a reset switch in the machine, or could the pump be jammed?
    quietguard3's Avatar
    quietguard3 Posts: 2, Reputation: 1
    New Member
    		  
    #6

    Oct 17, 2012, 08:02 PM
    I did the reset code for my dishwasher and it seems to act like its going to run through the cycle but will not any ideas?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore quiet guard 3 manual [ 1 Answers ]

My knmore quietuard 3 does not clean very well. It seems that no steam comes out anymore either. I have checked for water block at the screan and grnding area but everything seems clear. Could it be the heating element is bad after only a couple of years and not running dry that I know of? How do...

Kenmore Dishwasher quiet guard 3 [ 1 Answers ]

Having some problems with my Kenmore Quiet Guard 3. Its not quiet anymore! Its sounds like an airplane taking off. What could this be? Everything else seems to work fine. I must mention its about 6 years old.

Kenmore ultrawash quiet guard dishwasher [ 0 Answers ]

I've had my Kenmore ULtrawash Quiet Guard Deluxe,#10040660 for a couple of years and it's only used for three months out of each year.Yesterday I noticed a couple of black spots near the bottom front outside door and I wiped it thinking I had spilled something. Alas, it was the paint that had...

Kenmore quiet guard 3. Grinding when washing. [ 0 Answers ]

Washer was grinding for about a month and now today it starts washing and stops all along grindng. I took the screen off the bottom and found 2 pieces of broken glass. One piece was wedged. Thought I might have fixed it but to no avail. Would anyone know if the motor is the problem.

Kenmore quiet guard 1 [ 0 Answers ]

I have a Kenmore Quiet Guard 1 and it worked fine yesterday but now will not work at all. The lights on the front come on but when I close the door and turn the knob to normal wash it does nothing. We flipped the breaker, although I knew it was getting power because the lights were on, and still...

View more questions Search