 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hello everyone. It's been a while since I've been here. So I have a question that I would like some help with. I had a car port built next to my garage. I now have to run power to the car port. In my garage I have a 15 amp circuit (14 gauge copper wire) with two outlets, one light, and one garage...
I just had new vinyl siding placed on my house. Where the outside lights had been, they placed vinyl master mounts. There were no junction boxes previously, so the wires just stick out of the small opening on the master mounts. Should I use 4" round pvc boxes before mounting my new lights? ...
I am trying to run a string of four lights outside of my place of business to brighten the parking lot at night. I am using 12-2 UF-B with Ground Outdoor Electrical Wire, a 40 amp timer, and four lights (rated at 120 v and 60 watts each). I have everything ran, but when I flip the breaker...
I have a Hampton Bays outdoor light with a dawn to dusk sensor, but it stays on all the time. I tried to buy a new sensor , but it's out of stock The light #240-336 is a coach lantern. Where canI get a sensor and how much do they cost?
Dear all, Happy holiday's I have two 40amps in the main box that feeding the AC Unit. I would like to know if its possible and code pass in new Jersey, Piscataway. To tap into that conduit at a junction point and extend the required wires in a conduit 30-40 feet to a Spa 50/AMPS @ 240...
View more questions Search
|
