Ask Experts Questions for FREE Help !
Ask
    PLUMBSPAN's Avatar
    PLUMBSPAN Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 23, 2011, 06:22 PM
    24 Volts and millivolts gas valves
    How could I connect a 24 volts gas valve and a millivolts gas valve on separate units so they both shut shut down at the same time or ( connected in seriese or interlock to shut down both appliances at the same time new code in NYC)
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Jun 24, 2011, 11:32 AM
    Those two type gas valves are not compatible unless you have a relay to work them. If I had a better idea of what you are trying to do I could advise you./ DrTom4444
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have 120 volts coming off gas meter [ 12 Answers ]

Gas valves [ 1 Answers ]

Ignitor is glowing red and gas is not igniting... blower is running and furnace is clean the service indicator light is a solid red light no blinking what could be my problem

White rodgers gas valves [ 1 Answers ]

I have a WR gas valve model 36C68 type 209. Gas is continuously provide to the pilot, even when the pilot is disconnected electronically, and or, when the entire furnace system is unplugged. I have removed and inspected the pilot control value mounted on top of the gas value body. The small...

Luxaire furnace gas valves [ 0 Answers ]

Hi Guys, I have an older Luxair furnace that has a sticky gas valve or something. The pilot works fine but the tubes won't ignite. I gently bang on the valve with a hammer and the furnace takes off and runs fine for a couple days. Is there any way that I can maintenance the gas valve to extend its...

Is there a lubrication for furnace gas valves [ 1 Answers ]

Hi, I have a Natural Gas furnace that I have had converted to Propane for use in my shop. I use it only occasionally and it works well but the valve passes. Once the pilot is lit everything works well except that while in idle the gas valve passes to allow a small amount of Propane gas to...

View more questions Search