Installed a honeywell rth230b, the furnace turns on, but the central air won't.

Check out some similar questions!

New Honeywell RTH230B T'stat, No cold air [ 6 Answers ]

I exchanged a GE thermostat (not sure of the model #) with a Honeywell RTH230B today. Coming from the wall, there is a red, white, yellow, green, and blue wire; however the blue wire was not connected to the old thermostat. I'm 100% sure about this, it was capped off and wrapped around the other...

Heating & Air Condition (Honeywell RTH230B) [ 9 Answers ]

Can someone tell me how to install a Honeywell thermostat to a Janitrol unit?. confused I see a total of 7 wires(blk,red,yellow,green,what,brwn,orang)... Where do I start?:confused:

Honeywell RTH230B thermostat not blowing cold air [ 3 Answers ]

I just installed a Honeywell RTH230B thermostat. Connected the four wires, per the instructions - Red to Rh (jumpered to Rc) White to W, Yellow to Y and Green to G. I live in Arizona, and have a split air conditioning system. The Air conditioning compressor unit turns on, the fan blows, but no...

Honeywell RTH230B - furnace starts often [ 2 Answers ]

I recently replaced my old mercury tilt thermostat with a programmable (5/2) Honeywell RTH230B digital unit. I didn't have too much problem with the install - to a 2 wire forced air oil furnace - however I find the furnace cycling through start and stop much more than usual,to the point to...

Honeywell RTH230B blowing hot air [ 1 Answers ]

I installed the Honeywell RTH230B in the fall and just switched to air except it only blows out hot air. It is not displayed in the setup. There are for additional wires, blue, black, brown and orange. I don't know if they have anything to do with why no cool air is blowing or not. I have the...

View more questions Search

Check out some similar questions!

Add your answer here.